resetý

CFE version 1.0.37-5.4 for BCM96358 (32bit,SP,BE)
Build Date: 2009年 03月 31日 星期二 17:07:55 CST (root@localhost.localdomain)
Copyright (C) 2000-2005 Broadcom Corporation.

Boot Address 0xbfc00000

Initializing Arena.
Initializing Devices.
Parallel flash device: name MX29LV320AB, id 0x22a8, size 4096KB
798
875
0x6:0x11f
0x6:0x108
0x6:0x108
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
Total memory: 33554432 bytes (32MB)

Total memory used by CFE:  0x80401000 - 0x80533000 (1253376)
Initialized Data:          0x8041C0E0 - 0x8041CDD0 (3312)
BSS Area:                  0x8041CDD0 - 0x80431000 (82480)
Local Heap:                0x80431000 - 0x80531000 (1048576)
Stack Area:                0x80531000 - 0x80533000 (8192)
Text (code) segment:       0x80401000 - 0x8041C0D8 (110808)
Boot area (physical):      0x00533000 - 0x00573000
Relocation Factor:         I:00000000 - D:00000000

Board IP address                  : 192.168.1.1  
Host IP address                   : 192.168.1.100  
Gateway IP address                :   
Run from flash/host (f/h)         : f  
Default host run file name        : vmlinux  
Default host flash file name      : bcm963xx_fs_kernel  
Boot delay (0-9 seconds)          : 1  
Board Id Name                     : 96358GW  
Psi size in KB                    : 24
Number of MAC Addresses (1-32)    : 10  
Base MAC Address                  : 00:22:6b:fc:9f:d8  
Ethernet PHY Type                 : Internal
Memory size in MB                 : 32
CMT Thread Number                 : 0

get pid2 at0xbffd886a
pid checked!
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 111
CFE> 
CFE> 
CFE> 
CFE> help
Available commands:

assign              sercomm assign mode
download            sercomm download
w                   Write the whole image start from beginning of the flash
e                   Erase [n]vram or [a]ll flash except bootrom
r                   Run program from flash image or from host depend on [f/h] flag
p                   Print boot line and board parameter info
c                   Change booline parameters
f                   Write image to the flash 
i                   Erase persistent storage data
b                   Change board parameters
reset               Reset the board
flashimage          Flashes a compressed image after the bootloader.
help                Obtain help for CFE commands

For more information about a command, enter 'help command-name'
*** command status = 0
CFE> p
Board IP address                  : 192.168.1.1  
Host IP address                   : 192.168.1.100  
Gateway IP address                :   
Run from flash/host (f/h)         : f  
Default host run file name        : vmlinux  
Default host flash file name      : bcm963xx_fs_kernel  
Boot delay (0-9 seconds)          : 1  
Board Id Name                     : 96358GW  
Psi size in KB                    : 24
Number of MAC Addresses (1-32)    : 10  
Base MAC Address                  : 00:22:6b:fc:9f:d8  
Ethernet PHY Type                 : Internal
Memory size in MB                 : 32
CMT Thread Number                 : 0

get pid2 at0xbffd886a
pid checked!
*** command status = 0
CFE>